Locators such as Apple AirTag or devices using the Google Find My network make it relatively easy to find lost keys, luggage or a backpack. However, their functioning depends on the availability of the relevant network and devices that can convey the location of the locator. But what if we move in the mountains, in the forest or in a place without a mobile signal and without a dense network of users?
Práve na tento problém sa zameriava projekt LibreTag by Juraj Bednár. It is an independent locator that uses a community network instead of Apple or Google infrastructure MeshCore built on LoRa technology. It aims to enable object location tracking without a central service provider, user accounts, and mobile network dependency.
LibreTag was introduced as the first public preview release. The project is open-source and its ambition is to create a simple, energy-saving and privacy-respecting system that users can operate in their own community radio network.
You will read in the article
MeshCore instead of Apple or Google network
The basic difference from ordinary Bluetooth locators is the method of communication. LibreTag sends reports through MeshCore - a decentralized mesh network built by users themselves using LoRa devices and repeaters. Individual nodes pass messages to each other and gradually expand the network coverage.
I released LibreTag. It's the first public release, so far a preview.
It's a locator like AirTag, only it doesn't go through the Apple or Google network. It sends messages through MeshCore, a LoRa mesh that people build themselves. You don't need an account on anyone's server and it has no identity. The message is encrypted for you and for those with whom you share the tag. For others, it's 45 bytes that can't be linked to the previous message.
So it works where AirTag doesn't: in the forest, in the mountains, anywhere where no one has a cell phone with a signal, as long as there is MeshCore coverage.
What I like about it:
– Even without GPS, it will tell you the area. It calculates it from the repeaters that the tag heard, and on boards with Wi-Fi and from the surrounding networks.
– Saves the mesh. The message is one 45-byte packet, roughly once an hour or less, and is silent when parked or near your cell phone. The proximity tag command goes via Bluetooth or zero-hop, not flood.
– Nostr bridge transmits messages from the mesh on the relay, so you can find the tag from the browser even if you don't have a meshcore node.
– When the tag crosses the border, it adjusts itself to the radio settings of the neighboring country and forwards the messages to the bridge there. You still see him.
– It is open source under the MIT license. Seeed Wio Tracker L1 and Heltec V3 firmware, Android app (APK or Zapstore), web app and bridges in Python and Android.https://t.co/BDPIJKxGtJ
— Juraj Bednar🏴💛🌘 (@jurbed) November 20, 2026
Therefore, the locator does not need to have a foreign smartphone with an Internet connection nearby. However, it needs access to one of the MeshCore nodes, or to other nodes that can forward the message. Where a mesh network is built, LibreTag can work even without a mobile signal. In an undeveloped area, of course, LoRa technology alone will not create coverage.
This is especially interesting for hiking, outdoor activities or tracking equipment in more remote locations. If there are suitably placed repeaters nearby, the tag can transmit information about its location without the need for a classic mobile data connection.
Privacy without a central account
One of LibreTag's main features is its emphasis on privacy. The system does not require an account on a central tracking server, and according to the design of the project, the tag is not assigned a public identity that could easily be tracked across the network.
Location reports are encrypted for the owner of the locator and the people with whom it shares its location. According to the author, one message is only 45 bytes in size. For other network participants, it represents a short encrypted packet that cannot be easily matched to previous messages from the same device.
Such an approach limits the amount of information a casual observer can obtain about the movement of a tag. It is not only about encrypting the content of the message, but also about trying to minimize the possibility of long-term tracking based on the repeated identification of the device. However, the radio communication itself remains part of the network, so we cannot talk about the absolute invisibility of the device.
Location even without GPS
An interesting feature of LibreTag is the ability to determine at least an approximate area even when GPS coordinates are not available. It uses information about MeshCore repeaters that the tag has captured during its operation. From their known location, it is possible to deduce in which area the device is likely to be located.
On hardware with Wi-Fi, the system can also use surrounding wireless networks. They represent another source of information for estimating the position. The result may not be an exact location on the map as with GPS, but an orientation localization that can be useful, for example, when searching for an object in a wider area.
However, a distinction must be made between an exact GNSS position and an estimate based on the surrounding infrastructure. The resulting accuracy depends on how many repeaters or known Wi-Fi networks the tag has available and how high-quality the information about their location is.
Minimum load for mesh network
With similar devices, not only battery life is important, but also how much traffic they add to the common radio network. LibreTag tries to be as economical as possible in this regard. A single message is only 45 bytes and is sent about once an hour, or even less often.
If the tag is parked or located near your own mobile, it can go into power saving mode and not send further messages. The goal is to prevent the network from being overloaded with messages in a situation where the location of the device does not change or the locator is right next to its owner.
Control is just as important. Commands addressed to the locator in its vicinity can be sent via Bluetooth or direct zero-hop communication. Therefore, it is not necessary to send each request through the entire mesh network. Such an approach is especially reasonable in a community network, where available radio capacities are shared by a larger number of users.
Nostr bridge - access to the location also from a web browser
LibreTag also takes into account users who do not have their own MeshCore node or are not currently connected to a mesh network. Nostr bridge serves this purpose. It is a bridge that transmits messages from the local LoRa network to the Nostr relay.
Thanks to this, location information can also be displayed via the web interface. Thus, the user does not have to have a separate MeshCore node with him all the time - he just needs access to the web application and the corresponding Nostr connection. The tag itself continues to communicate via the LoRa mesh, not directly via the Internet.
The connection of the mesh network with Nostr expands the possibilities of using the project. The local radio infrastructure can relay messages to the Internet layer without the entire system having to rely on one central server of the locator operator.
Automatic change of radio settings when crossing borders
An interesting detail is also the behavior when transitioning between countries. The radio parameters of LoRa devices may vary from region to region according to local rules for the use of unlicensed bands. LibreTag should therefore support automatic adjustment of settings after crossing the border.
According to the available description, the tag switches to the radio parameters of the neighboring country, and its reports can then be relayed by the local bridge. Thus, the user does not have to manually reconfigure the device every time the region is changed. The prerequisite is, of course, the availability of the relevant MeshCore network and the bridge on the other side of the border.
This function is also important from the point of view of operating regulations. Automatic configuration change is intended to help adapt the device to regional conditions, but when using LoRa hardware, it is still necessary to pay attention to the applicable frequency and power restrictions in the given country.
Hardware, applications and availability
LibreTag is designed as an open ecosystem, not a single closed product. According to the presentation of the project, firmwares for Seeed Wio Tracker L1 and Heltec V3 devices are ready. The project also includes an Android app, available as an APK or via the Zapstore, a web app and software bridges written in Python and for Android.
The source codes are released under the MIT license, allowing for community exploration, modification, and further development. This is important in a similar project. Users are not solely dependent on a manufacturer or commercial service provider and can participate in both hardware and software development.
An interesting concept for community networks
LibreTag brings a different perspective on locating objects. Instead of using a large commercial network of mobile devices, it builds on a local LoRa infrastructure built by the users themselves. The advantage is independence from a mobile signal and an emphasis on privacy, the disadvantage is naturally smaller and geographically uneven coverage.
For MeshCore users, LibreTag can be a practical extension of an existing network. What is particularly interesting is the minimalistic transmission, localization even without GPS and the connection with Nostr. Since this is the first public preview release, further development will show how to expand hardware support, improve the user interface and verify the operation in real conditions.
Project and source codes: GitHub - LibreTag
Official site: cypherpunk.today/libretag
Frequently asked questions
How is LibreTag different from Apple AirTag?
LibreTag does not use the Apple or Google network, but the community LoRa mesh network MeshCore. So it works in areas with its coverage even without a mobile signal and an account on the central tracking server.
Does LibreTag need GPS for location?
Not always. If it doesn't have GPS data, it can estimate the approximate area from the MeshCore repeaters it has picked up and, on supported hardware, from nearby Wi-Fi networks.
Is the location of the locator protected from other network users?
By design, the messages are encrypted for the owner and the people with whom he shares the location. Other participants see a short 45-byte packet with no easy way to link it to previous messages.
What hardware does LibreTag support?
The first public release shows support for Seeed Wio Tracker L1 and Heltec V3 boards. The project also includes an Android application, a web interface and software bridges.
Does LibreTag also work outside of Slovakia?
The project provides for automatic adjustment of radio parameters when moving to a neighboring country. However, for other reports, MeshCore needs an available network and a bridge that can mediate them.
