When Icom showed off the new IC-7110 transceiver at the JARL Ham Fair 2026 in late August, one question remained open: how much it would cost. The answer has now come from German retailer WiMo, who are offering it for €1,829.00 including VAT, with expected availability from 11/12/2026. Icom says in its November 17 report that the launch is planned for this winter.
If you've been riding the IC-7100 for years or are looking for one radio for both your shack and your car, this is the model you may have been waiting for. This article is based on the Icom Japan report, WiMo and GigaParts vendor offerings, and our Ham Fair 2026 article.
You will read in the article
Price and availability
WiMo lists a price of €1,829.00 including VAT and an estimated date of availability of 11/12/2026. This is a seller's date, not a guaranteed delivery date, so when ordering, expect that it may still move.
In the US market, GigaParts is running it for ,899.95 and taking orders. However, he himself points out that the radio cannot be sold before FCC certification and that the official price and delivery date have not yet been announced. According to him, the first December delivery should be very limited.
The successor to the IC-7100 in two parts
The IC-7110 follows on from the IC-7100 and retains its greatest advantage: dvojdielnu konštrukciu. Podrobnosti z predstavenia nájdete v our article from Ham Fair 2026. The control panel with the display is separate from the main unit, so you can hide the main unit under the seat or in the trunk and only have the panel in front of you.
The panel measures approximately 200 x 84 x 36mm, has a front-facing speaker and a microSD card slot. You attach it to Icom mounts, to AMPS holes or to a photo tripod with a 1/4 inch thread. The main unit has an aluminum die-cast frame with active cooling, is powered by 13.8 V and has two SO-239 antenna connectors.
On the panel there is an RJ-45 microphone connector, an RJ-45 control cable connector and 3.5 mm jacks for headphones and a key. On the main unit you will find an ACC connector, an input for an external antenna tuner, a data connector and two outputs for an external speaker.
For mounting, Icom offers the MBA-19 table stand and the MBA-20 dashboard holder. The IC-7110 is explicitly specified by the manufacturer for home, mobile and portable operation.
Bands, fashions and performance
The transceiver covers KV, 50 MHz, 144 MHz and 430/440 MHz in all modes: SSB, CW, RTTY, AM, FM and D-STAR DV. In addition, only the European version has the 70 MHz (4 m) band.
The power is 100 W on KV and 50 MHz and 50 W on 70, 144 and 430/440 MHz. The final stage is a new construction.
There is enough memory for more demanding use: 500 common channels with alphanumeric names, 4 call channels and 2,500 channels in the converter list. It can be tuned in steps from 1 Hz.
Direct sampling and dual reception
Below 74.8 MHz, the receiver works on the principle of RF direct sampling, which, according to Icom, improves phase noise. It is complemented by a superheterodyne on higher bands.
Everything is controlled via a 4.3-inch color touchscreen with automatic dimming and backlit buttons. There is also a spectroscope and a waterfall in real time, as well as an audio scope.
Zaujímavý je nezávislý duálny príjem. One receiver monitors KV, 50 or 70 MHz, the other 144 or 430/440 MHz. You can thus listen to, for example, 40 m and the local Converter on 2 m at the same time, even in D-STAR DV mode.
FT8, D-STAR a CW dekodér
Pre digitálne módy má IC-7110 zjednodušené nastavenie pre FT8 s predvoľbami dátových módov. Vstavaný dekodér CW a RTTY prevzal z IC-7300MK2.
D-STAR je plnohodnotný: režim terminálu a prístupového bodu, monitorovanie DV prevádzača a posielanie obrázkov bez počítača či telefónu. You can use the built-in GPS receiver when operating D-STAR. Voice recorder, VOX and voice synthesis are also available.
Wi-Fi, Bluetooth and remote control
The radio has dual-band Wi-Fi 2.4/5 GHz, Bluetooth 5.3 and Ethernet. You can remotely control it via Wi-Fi with the RS-BA1 v2 program and update the firmware online.
The main unit has a USB-C port with two virtual serial ports. The radio can also save a screenshot. For phones, there are RS-MS3A and RS-MS3I applications for D-STAR and ST-4001A and ST-4001I for working with images. The optional BT-002 Bluetooth headset fits in the car.
Compared to the IC-7100, it is therefore a different generation: touch screen, direct sampling and wireless connectivity, while the proven two-part concept remains.
Where to find more
Follow the current price and delivery date directly at the WiMo menu. Official information from the manufacturer can be found in to the Icom Japan report.
Frequently asked questions
Koľko stojí Icom IC-7110 v Európe?
Predajca WiMo ho ponúka za 1 829,00 € s DPH. This is the seller's price, we have not yet found the official Icom price list for Europe.
When will the IC-7110 be available?
WiMo lists estimated availability from 11/12/2026 and Icom talks about a launch this winter. According to US retailer GigaParts, the first delivery will be very limited.
Does the IC-7110 have a 4m band?
Yes, but only the European version. Power at 70 MHz is 50 W.
Can the control panel be separated from the main unit?
Yes, the IC-7110 retains the two-piece design of the IC-7100. The panel is connected to the main unit with a cable through an RJ-45 connector.
Can the IC-7110 be controlled remotely?
Yes, via Wi-Fi with the RS-BA1 v2 program. The main unit also has Ethernet and USB-C.
